Category: Ac Installation & Maintenance Services

Air Conditioning Services

We are the leading air conditioning maintenance company in Dubai for best AC maintenance & AC repair servicesWe understand common problems that recognise what we need to fix:

Ducting Supply and installation

Healthy breathing is start of healthy Living

Air conditioning ducts are one of the most overlooked components of your residential and commercial heating, ventilation, and air conditioning (HVAC) system. AC ducts are tubes or channels through which your AC unit supplies and removes air from your home or office. AC duct installation, which is also called ductwork, is an important step in the process of setting up your HVAC system.

Kimi Clean is a full-service HVAC installation and maintenance company in Dubai known for delivering the highest quality AC duct installation and repair services in the city. Our AC duct installation and maintenance technicians are fully trained, qualified, and courteous.

Our goal is to deliver the best AC duct installation, repair and maintenance services for villas, residential buildings, offices, and restaurants in Dubai. Do you need a professional HVAC installation or maintenance service?

Request for a quote today using the contact form below and a qualified technician will get back to you ASAP.

Chilled Water System

Chiller Systemsare the essential factor in Middle East and all other part of the World. It helps in maintaining large buildings in Hot areas cool during the summer seasons.For chiller system to maintain this level of efficiency there must be a proactive leak detection process to identify problems in a timely manner.RIO TIMEis able to identify and pinpoint problem areas in your pipe network in the shortest time..!!We use Infrared Thermography and more than seven other Techniques to mitigate the risk. Comprehending these we assume we can help you meet your sustainability and efficiency needs!

Split Unit Installation

Asplit system air conditioner is a great option for keeping your home cool and comfortable in the summer months. … This type of A/C is ductless, so all you have to do is install the cooling unit inside and the compressor and condenser unit outside, then run piping and a power cable between the units.

There are 2 types of VRF system, heat pump and heat recovery system.

Imagine heating or cooling each room in a building to the occupants’ preference using a bare minimum of energy.

Variable refrigerant flow (VRF), also known as variable refrigerant volume (VRV) is an HVAC technology which uses refrigerant as the coolingandheating medium. As with minisplit units, the refrigerant in a VRF system is conditioned by a single outdoor condensing unit and circulated within the building to multiple indoor units without the benefit of ductwork.

VRF HVAC systems use variable motor speed and variable refrigerant flow toheatand cool, unlike standard units which use a simple on/off operation. They feature inverter compressors which operate with lower power consumption and partial heating or cooling loads; multiple indoor units on the same refrigerant loop; and a modular design offering the ability to grow the system.

VRF systems also allow users to control heating and cooling individually in each room (or zone), and with some units, operate heating and cooling at the same time. The benefit of variable motor speeds is that VRF technology uses far less energy to heat and cool, often saving up to 55% in utility costs.This savings offers a quick return on investment and state-of-the-art heating and cooling.

How does a VRF system work?

When turned on, the fully automatic VRF HVAC system notes the desired room temperature set by the occupant (or central controller) and notes the outdoor ambient temperature. It then implements its logic and operates the compressor at the exact level needed to reach the desired indoor comfort level.

When another indoor unit is turned on, the outdoor unit recalculates the requirements from all of the indoor units and increases the compressor load, according to demands. The ability for a VRF HVAC system to adjust to the outdoor conditions is its” secret sauce” and what makes it so energy efficient, compared with traditional water-cooledsystems with chillers and fan coils.

A VRF HVAC System eliminates air temperature fluctuations

The key to comfort is to avoid swings in room temperature. In traditional systems, compressors are either on or off, so fluctuations in room temperature occur as the compressor stops and starts again.

In a VRF system, since the speed of the compressor can be varied, it can operate continuously for longer periods. Innovative compressor technology modulates the flow of refrigerant according to the exact demands of pre-sets in individual areas of a building. This allows the system to deliver heating or cooling as required to each room without fluctuation.

As there are no ducts in a VRF system, no temperature loss occurs as it does with traditional systems when treated air moves through ductwork. The result is consistent heating and cooling at very high energy efficiencies.

As an added benefit, VRF systems greatly reduce ambient noise, as they run much quieter than traditional HVAC systems.

How does a VRF system work?

When turned on, the fully automatic VRF HVAC system notes the desired room temperature set by the occupant (or central controller) and notes the outdoor ambient temperature. It then implements its logic and operates the compressor at the exact level needed to reach the desired indoor comfort level.

When another indoor unit is turned on, the outdoor unit recalculates the requirements from all of the indoor units and increases the compressor load, according to demands. The ability for a VRF HVAC system to adjust to the outdoor conditions is its” secret sauce” and what makes it so energy efficient, compared with traditional water-cooledsystems with chillers and fan coils.

Types of VRF HVAC systems

VRF HVAC systems appear as cooling-only systems, heat pump systems,and heat recovery systems, which can heat and cool at the same time. A typical system consists of at least one outdoor unit, several indoor units, refrigerant piping and communication wiring. Each indoor unit is controlled by its own wired paneland some systems offer wireless remote control and centralized controllers to enable controlling all indoor units from one location.

The outdoor units are lightweight and take up little space. This allows the opportunity to install the outdoor unit in a service elevator or on a rooftop without the need for installing additional support structure for the roof.

RIO TIME is expert in installing and maintaining commercial VRF HVAC systems.

Welcome to Riotime Technical Services, the leading provider of professional ducted split installation services. If you’re looking for a reliable and efficient solution to maintain optimal indoor climate control, our team of experts is here to deliver outstanding results.

Why Choose Ducted Split Installation?

Ducted split systems offer a range of benefits that make them an ideal choice for both residential and commercial properties. Here are some key advantages:

1. Uniform Climate Control: With ducted split installation, you can enjoy consistent cooling and heating throughout your space. The system distributes air through concealed ductwork, ensuring every room remains at your desired temperature, regardless of its size or layout.
2. Zoning Flexibility: Ducted split systems allow you to divide your space into zones, each with individual temperature control. This enables you to personalize the climate settings according to specific areas and the preferences of occupants, optimizing comfort and energy efficiency.
3. Energy Efficiency: Our ducted split installations are designed with energy efficiency in mind. The systems utilize advanced technologies, such as variable speed compressors and intelligent temperature sensors, to regulate energy consumption and reduce utility costs while providing exceptional performance.
4. Space Optimization: Unlike traditional split systems, ducted split installations are virtually invisible. The ductwork and vents are discreetly integrated into the structure, maximizing space and maintaining the aesthetics of your interior design. This allows for a clean, clutter-free environment.
5. Enhanced Indoor Air Quality: Ducted split systems not only regulate temperature but also contribute to improved indoor air quality. These systems incorporate advanced air filtration and purification features, removing dust, allergens, and pollutants from the air, creating a healthier and more comfortable living or working environment.

Our Ducted Split Installation Process:

When you choose Riotime Technical Services for your ducted split installation, you can expect a seamless and efficient process tailored to your specific requirements:

1. Consultation: Our skilled technicians will conduct a thorough consultation to understand your cooling and heating needs, evaluate your space, and discuss your preferences and budget. We’ll provide expert advice and recommend the most suitable ducted split system for your property.
2. Design and Customization: Using our expertise and state-of-the-art design tools, we will create a customized system layout that maximizes efficiency and addresses the unique characteristics of your space. Our goal is to ensure optimal air distribution and comfort in every corner of your property.
3. Professional Installation: Our experienced technicians will handle the installation with precision and attention to detail. We’ll carefully install the outdoor unit, indoor unit, ductwork, vents, and controls, following industry best practices and adhering to all safety standards. Our focus is on delivering a flawless installation that guarantees long-term performance and reliability.
4. Testing and Calibration: Once the installation is complete, we conduct rigorous testing and calibration to verify the proper functionality of your ducted split system. We’ll check airflow, temperature consistency, and the performance of individual zones to ensure optimal operation.
5. Maintenance and Support: To keep your ducted split system operating at its best, we offer comprehensive maintenance plans. Our team will schedule regular inspections, cleanings, and tune-ups to maximize energy efficiency, prevent breakdowns, and extend the lifespan of your system.